Colour: white
Colour: grey
Colour: white (600ml)
Colour: grey (600ml)

About

Universal, elastic, 1-component sealant based on MS-hybrid-polymer for indoor and outdoor application, on absorbent and non-absorbent substrates. Completely weather resistant, moisture curing, silicone free, neutral polymerization, odourless, very low-emission (meets EMICODE EC1R).

Advantages

Universal
1-coponent based on high quality MS Polymer Hybrid
Indoor and outdoor application
Fast drying
On absorbent and non-absorbent substrates
Completely weather resistant
Moisture curing
Silicone free
Neutral polymerization
Odorless
Very low-emission (meets EMICODE EC1R)
Paintable

Joints in building construction, connection joints on metals, various plastics, concrete etc., sealing of joints in plumbing.

Turbo-Fix extra flex is suitable where the joints have to be painted or where silicone sealant is not required.

Not suitable for the use on cover strips of copper. Turbo-Fix extra flex is also not suitable for the sealing of natural stones.

Processing

The right joint dimensions and a pre-treatment of the adherence area are necessary for an excellent sealing. See DIN specification 18540 F and SIA specification 274 for the dimensioning of joints in building construction. The precondition for maximum adhesive strength is a clean, dry and fat-free substrate with a perfect structure.

Turbo-Fix extra flex adheres to many substrates as varnished wood, metals and various plastics without Adhesion promoter. In case of big fluctuations in temperature or contact with water, the demands on the adherence are high. Therefore we recommend the use of Adhesion promoter V2 on non absorbent substrates. On absorbent substrates, as for example concrete, we generally recommend the use of Adhesion promoter V21. Preliminary tests are recommended.

Cleaning of the surface

The substrate must be stable, clean, dust-, oil- and fat-free. Good results can be achieved with rubbing alcohol.

Adhesion promoter

On many clean substrates a good adherence can be achieved without Adhesion promoter. However, it should always be tested, if the cured product is exposed to big fluctuations in temperature or has contact with water. In that case, and with absorbent or difficult substrates, we always recommend the application of Adhesion promoter V21 in advance. On non absorbent substrates we recommend the application of Adhesion promoter V2.

Tooling

We recommend tooling the joints with tooling solvent and eventually using help-tools for joints.

Work and environment safety

Not dangerous. No labelling obligation. Important information on the work and environment security you can find in the safety data sheet.

Chemical resistance

Good to water, aliphatic solvents, oils, greases, diluted inorganic acids and alkalis moderate to esters, ketones and aromatics not resistant to concentrated acids and chlorinated hydrocarbons completely weather-resistant

Turbo-Fix extra flex is paintable

Because of the diversity of varnishes and paints on the market, we recommend a preliminary test. Using alkyd based paints, the drying process may be slower. If Turbo-Fix extra flex is applied to painted or plastered substrates, a sufficient drying time of the paint/plaster must be kept (in general 10 days). After cleaning with acetone, joints can be varnished at any time.

SWISS MADE

PDF (click the icon)