About

Universal, highly adhesive 1-component sealant based on MS-hybrid-polymer for indoor and outdoor application, on absorbent and non-absorbent substrates.

Absolutely weatherproof, moisture curing, silicone free, neutral polymerization, odorless, with low emissions.

Connection joints on concrete, metals, wood and various plastics. For joint sealing in structural engineering, outside of DIN 18540.

Various adhesions in construction and industry.

Processing

The precondition for maximum adhesive strength is a clean, fat-free surface with a perfect structure. Turbo MS adheres to many substrates as lacquered wood, metals and various plastics without Adhesion promoter.

Cleaning of the surface

The substrate must be stable, clean, dust-, oil- and fat-free. Good results can be achieved with rubbing alcohol.

Adhesion promoter

On many clean substrates a good adherence can be achieved without Adhesion promoter. However, it should always be tested, if the cured product is exposed to big fluctuations in temperature or has contact with water.

Tooling

We recommend tooling the joints with tooling solvent and eventually using help-tools for joints.

Work and environment safety

Important information on the work and environment security you can find in the safety data sheet.

Chemical resistance

good: to water, aliphatic solvents, oils, greases, diluted inorganic acids and alkalis
moderate: to esters, ketones and aromatics
not resistant: to concentrated acids and chlorinated hydrocarbons
Completely weather-resistant

Turbo MS Economy is paintable

Because of the diversity of varnishes and paints on the market, we recommend a preliminary test. When using alkyd based paints based, the drying process may be slower
If Turbo MS is used for painted or plastered substrates, you have to leave enough drying time (normally 10 days).

After cleaning with acetone, joints can be varnished at any time.

PDF (click the button)